How To Reset Epson L3252 Printer -

Use this method if you are having connection issues or need to connect to a new Wi-Fi network. the printer. Press and hold the Network Status button (usually marked with an 'i') and the Power button simultaneously. Continue holding until the Wi-Fi Direct lights flash alternately, then release both.

The internal components can hold an electrical charge for several minutes. To force a full discharge, press and hold the physical Power button on the printer for roughly 15 to 30 seconds. You might see the power light flicker briefly; this is the residual electricity being flushed out.

Download a verified version of the from a trusted technician website. how to reset epson l3252 printer

Press the Power button to switch off the machine.

While holding it, press the until the Wi-Fi and Wi-Fi Direct lights flash alternately. Use this method if you are having connection

Plug the power cable back into a direct wall outlet (avoid using surge protectors or extension cords for this step) and reconnect the USB cable.

Click on “Read Waste Counters” to confirm the pad level. If it shows 100% or over 100%, a reset is needed. Continue holding until the Wi-Fi Direct lights flash

If you have changed your router, updated your Wi-Fi password, or the printer keeps disconnecting from your network, resetting the network settings is required.

: Once the software prompts success, turn the printer off and back on. The blinking error lights should now be cleared. Troubleshooting Common Reset Issues

A: The error light will stop flashing, and the printer will allow normal printing. You can also re-run the utility to verify the waste counter is at 0%.