Odme S3000 Manual Pdf Patched -

The specific you need (e.g., sample pump wiring, OCM calibration steps)? The model year or software version of your S3000 unit? Share public link

The (Oil Discharge Monitoring Equipment), manufactured by KSB Seil Co., Ltd. (formerly Seil Seres), is a critical shipboard system designed to monitor and control the discharge of oily water into the sea. It ensures strict compliance with MARPOL Annex I and IMO Resolution MEPC.108(49). Core System Functions

: Must not exceed 30 liters per nautical mile.

Processes data from the flow meter, vessel speed, and OCM to calculate the oil discharge rate. odme s3000 manual pdf

International maritime law strictly regulates the discharge of oil into the sea. The ODME S3000 is fully type-approved to meet the requirements of the International Maritime Organization (IMO) and MARPOL 73/78 Annex I, Regulation 34. Key Discharge Criteria under MARPOL

Located in the cargo control room (CCR) or engine control room (ECR), this unit is the brain of the system. It processes inputs from the speed log, GPS, flow meter, and oil content meter to calculate the instantaneous rate of discharge. 2. The Measuring Cell (Oil Content Meter)

The ODME S3000 is an automated system designed to monitor, record, and control the discharge of ballast water and oil-contaminated water from cargo tank areas into the sea. The system ensures that any discharge remains strictly within the legal limits defined by international maritime law. Key Regulations Enforced by the ODME S3000: The tanker must be en route (moving). The specific you need (e

Feeds the ship’s speed and location into the MCU to calculate the liters-per-nautical-mile discharge rate.

Yes, you can keep the PDF on a tablet in the ECR. But regulations (MARPOL and most flag states) still require a of the approved manual on board. Print the calibration and troubleshooting pages, laminate them, and mount them near the unit.

Ensure the sample pump and freshwater flushing valves are properly lined up. (formerly Seil Seres), is a critical shipboard system

Total Oil Limit Set (Calculated from cargo quantity). Key 8: Discharge Condition (Clean ballast or Slops). 3. Calibration and Maintenance

Measures the oil concentration in parts per million (ppm) using optical scattering technology. It utilizes a measuring cell through which a sample of the discharge water passes. Skid Unit / Sample Conditioning Unit Location: Pump Room (Hazardous Area).