: Obtain the latest firmware file (typically a .ssu or .bin file) and save it to the root directory of your USB drive (do not put it in a folder).
Upgrades resolve common system freezes, battery calibration issues, and charging glitches.
This happens if you attempt to flash firmware meant for a different model (like the WS-6933 or WS-6980). Double-check the file version description. Meter Froze During Progress Bar
Navigate to the or Tools menu (depending on your current UI version). Select Upgrade by USB or S/W Upgrade . Select the file type (usually "All Code" or "Firmware"). Select the upgrade file you placed on your USB drive. Press OK to start the process. Satlink Ws-6979 Software Upgrade
Resolves sudden battery drain and UI freezing issues.
Scroll through the submenu to locate the option labeled , USB Upgrade , or Software Update . Select it and press OK . Step 4: Select the Firmware File
Verify the battery is charged to at least 70% . If the device powers off midway through a firmware flash, the motherboard may become permanently corrupted. : Obtain the latest firmware file (typically a
If you encounter issues during the process, consult these common error states and solutions: Device Does Not Detect the USB Drive
Before destroying old data, save your current satellite list if you have manually tuned specific satellites.
Go to Menu > System > Factory Setting and perform a total reset. This clears out old, fragmented cache configurations left behind by the older software. Double-check the file version description
Extract the archive on your computer first. Move only the raw .bin file directly onto the main screen of your USB drive. The Screen Froze Mid-Update Cause: Data corruption or hardware communication failure.
The Satlink WS-6979 is a reliable combo signal meter for satellite (DVB-S2) and terrestrial (DVB-T2) installations. Keeping its firmware updated ensures accurate measurements, unlocks new frequencies, fixes system bugs, and improves overall spectrum analyzer performance.