Rk Android Tool V135
The RK Android Tool v1.35 will only execute commands if it displays the message or "Found One MASKROM Device" at the bottom of the interface. Power off your Rockchip device completely.
RK Android Tool v135 is a focused utility for Rockchip-based device maintenance and flashing. It’s powerful for both single-device recovery and batch provisioning but requires attention to drivers, correct firmware, and careful operation to avoid bricking devices.
What (if any) are you currently seeing on your PC? Share public link
The is a legacy utility used for flashing firmware, kernels, and boot images onto devices powered by Rockchip processors (such as the RK2918, RK3066, and RK3188). While newer versions like v2.x exist, v1.35 remains a specific requirement for many older "Android TV sticks" and early tablets. 🛠️ Core Functions rk android tool v135
Wipe the Initial Download Boot (IDB) block to fix deep software bricks.
: Allows users to select specific components (Kernel, Boot, Recovery) to flash individually.
Use a reliable USB cable plugged directly into a motherboard port (avoid USB hubs). The RK Android Tool v1
Finding the original standalone v1.35 can be challenging. Unlike modern versions which are readily available on Rockchip’s official wiki or GitHub, v1.35 is now primarily preserved within older custom ROM archives.
The RK Android Tool v1.35 is a Windows-based application used to flash firmware, back up partitions, and manage the internal storage of Rockchip-powered Android devices. It communicates with the device while it is in "Loader Mode" or "Maskrom Mode." Key Features of RK Android Tool v1.35
Flashing low-level partitions on any Android device carries inherent risks. Installing an incorrect bootloader or modifying partition offsets with the wrong parameter file can result in a hard brick, rendering the motherboard useless. Always ensure that the firmware files match your device's motherboard revision model exactly before clicking run. It’s powerful for both single-device recovery and batch
While holding the button, connect the device to your PC using a high-quality USB data cable. Step 2: Launch the Utility
| Error Message | Cause | Solution | | :--- | :--- | :--- | | | Driver not installed or device not in loader mode | Reinstall Rockchip driver; short test points manually. | | Prepare IDB Fail | Corrupted NAND header or wrong parameter file | Run "EraseFlash" first, then "Run". | | Download Boot Fail | USB cable too long or poor power supply | Use a short USB A-to-A cable (< 1m); connect device to external power (if possible). | | Check Chip Fail | Incompatible firmware (e.g., RK3229 firmware on RK3128) | Double-check chipset via CPU-Z on Android. | | Mismatch Image Size | Partition image larger than flash partition | Repackage firmware with correct parameter file; uncheck "System" and flash via SD card. | | Device Removed Unexpectedly | Loose USB connection or power loss | Use a different USB port (prefer USB 2.0 over USB 3.0). |
Move your firmware folder directly to the root of your hard drive (e.g., C:\firmware\ ) and ensure all file names are strictly alphanumeric. Safety and Disclaimer
