Resetter Printer Canon G2010 Extra Quality

While holding the Power button, press the Stop/Reset button exactly 5 times . With each press, the warning LED will light up. Release Power: Release the Power button.

If you reset the digital counter multiple times without cleaning or replacing the physical pads, ink will eventually leak out from the bottom of the printer, risking permanent damage to your desk or internal electrical components. For a long-term fix, open the bottom panel of the printer, wash the white felt pads in warm water, dry them completely, and reinsert them.

Press the repeatedly until the letter " C " appears on the LCD. resetter printer canon g2010

For more detailed technical guidance, you can refer to the official Canon G2010 Online Manual

Close the software, turn the printer off, and turn it back on normally. Physical Maintenance: Cleaning the Absorber While holding the Power button, press the Stop/Reset

While resetting the Canon G2010 is effective, it is not a permanent solution without physical maintenance. Each reset allows more waste ink to accumulate. Eventually, the pads will become physically saturated, leading to ink leakage inside the printer, which can stain surfaces and damage electronics. Therefore, after two or three resets, it is strongly recommended to either:

Unplug the USB cable and power cord for roughly 10 seconds to drain residual energy from the capacitors. If you reset the digital counter multiple times

Ensure the printer is plugged into the wall and turned off, but keep the power cable connected.

In the "Clear Ink Counter" section, find and click Set .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.