Resetter Canon E510 «Must Watch»

Only perform the software reset below after the physical waste ink absorber is clean and reinstalled.

: Ensure your printer is truly in Service Mode (solid green light). Close the software, unplug the USB cable, plug it back into a different USB port, and restart the software as an administrator. Service Tool Error Code 002 or 005

The printer will feed a piece of paper and print a line of text (usually containing D=000.0 , which proves the counter is reset to 0%). resetter canon e510

If you are dealing with a standard error, you might first try a Hard Reset Turn off the printer. Press and hold the button for two seconds. While holding , press and hold , then press it 5 times while still holding

When $C \geq T$, the printer enters a protection mode. This is a conservative safety measure designed to prevent environmental contamination from leaking ink. Only perform the software reset below after the

Connect the printer to your Windows computer using a (Wi-Fi resets are not supported).

If the software throws an error 006, it means the Service Tool version is incorrect or the printer is not in Service Mode. Service Tool Error Code 002 or 005 The

Inside your Canon E510, there is a felt pad at the bottom. During print head cleaning cycles, the printer shoots ink through the nozzles to unclog them. That excess ink drips down into this pad.