Removes forgotten pattern locks, PIN numbers, or user passwords. Core Technical Specifications
Open the driver folder and run the setup file. Complete the wizard instructions and restart your computer to ensure the drivers register correctly. Step 3: Launch SP Flash Tool
Before flashing, always take a (readback via SP Flash Tool) from a working phone of the same model/variant – it can save you later if you encounter a bad flash file. qmobile x32 v2 flash file updated
Revives "soft-bricked" phones caused by improper rooting or custom ROM installations.
| Error Code | Meaning | Solution | |------------|---------|----------| | | Wrong driver or preloader mismatch | Reinstall VCOM drivers; use a different USB port (USB 2.0) | | BROM ERROR: S_BROM_CMD_STARTCMD_FAIL | Battery low or cable issue | Charge phone; replace USB cable | | ERROR: STATUS_SECURITY_SECURE_USB_DL | Secure boot enabled | Use “Format All + Download” after backing up NVRAM | | PMT changed for the ROM | Partition layout mismatch | Go to Format tab → Format whole flash → re-flash | | DA_HASH_MISMATCH | DA file mismatch | Use SP Flash Tool 5.1916 or older with a different DA | Removes forgotten pattern locks, PIN numbers, or user
: Completely wipes deep-rooted viruses or adware that standard factory resets cannot delete. Firmware Details & Prerequisites
Open the SP Flash Tool folder and double-click to launch the software. Locate the Download tab inside the interface. Step 3: Launch SP Flash Tool Before flashing,
: Ensure the file path does not contain special characters or spaces. Move the firmware folder directly to the C:\ drive root.
If you need help resolving a specific error code during the flashing process, please let me know. Tell me the you see in the tool, the Windows version on your computer, and whether your device is currently responsive or completely dead . Share public link
Solution: Boot the phone into its stock recovery menu by holding down the and Power buttons simultaneously. Select Wipe Data / Factory Reset , confirm the choice, and then reboot the system. This clears out residual cache conflicts from the previous OS installation.
Once a green Passed notification text appears, unplug the USB cord and turn on your device. Troubleshooting Common Errors