Patton Heater Model Poh2501 Manual Patched -

Heavy-duty steel fins sealed with thermodynamic oil (never needs refilling)

Turn the thermostat knob clockwise to the maximum setting (Highest position).

Plug the power cord directly into a standard 120-volt grounded AC outlet. Do not share the outlet with another high-wattage appliance. Setting the Controls

use abrasive cleaners, chemical solvents, or harsh detergents, as they will damage the finish. Never allow water to drip inside the heater housing. patton heater model poh2501 manual

– A pendulum‑type safety switch shuts off the heater if it is tipped over, preventing a potential fire hazard.

Plug the power cord directly into a standard 120V AC grounded wall outlet. Adjusting Power and Temperature

The thermostat is set lower than the current room temperature. Turn the thermostat dial clockwise to a higher setting. The thermostat is maintaining the set temperature. Heavy-duty steel fins sealed with thermodynamic oil (never

on a soft surface to prevent scratching the finish.

Always operate the heater on a flat, level, and dry surface. Do not place the unit on carpets or rugs that may block the bottom intake vents.

Always turn the heater off and unplug it from the wall when it is not in use. Do not pull on the cord to disconnect; grasp the plug firmly to remove it from the outlet. Operating Instructions Plug the power cord directly into a standard

Place the heater upright on a firm, flat, and stable surface. Maintain at least 3 feet of clearance from walls and flammable materials like furniture or curtains. Connection: Plug the unit directly into a grounded 120V wall outlet.

Keep all combustible materials—including furniture, pillows, bedding, papers, clothes, and curtains—at least 3 feet (0.9 meters) away from the front, sides, and rear of the heater.

: Turn the thermostat dial clockwise to the maximum (+) position to start. Once the room reaches your desired comfort level, slowly turn the dial counter-clockwise until you hear a "click" and the indicator light turns off. The heater will now cycle on and off to maintain that temperature. Tractor Supply Safety & Maintenance HOW TO TROUBLESHOOT YOUR SPACE HEATER

– Ensure nothing is blocking the fan blades or intake grille.