Micronova Es99 User Manual

Adjusts the ambient room fan speed settings manually.

Push the main stop button () to place the logic controller into standard shutdown mode. micronova es99 user manual

Decreases target temperature or navigates menu down. Power/Load Adjustment: Changes the heat output intensity. Menu/Set: Enters settings, programming, or menu modes. LED Indicators: Active Augur: Flashes when the fuel screw is turning. Active Heater (Igniter): Indicates the igniter is on. Active Fan: Indicates the convective fan is active. 3. Basic Operations: Starting and Stopping Adjusts the ambient room fan speed settings manually

, which is useful if the controller is malfunctioning in an older system. Digital Copies : PDF versions of the manual are often found on Google Drive Power/Load Adjustment: Changes the heat output intensity

: Set DIP-Switch 2 to ON to enable automatic restarting after a power interruption.

A: In most jurisdictions, pellet stoves must be installed by a certified professional (e.g., NFI certified in North America, HETAS in the UK) to comply with building codes and insurance requirements. Improper installation is a fire hazard.

To clear an active error code and reset the system panel, press and hold the for three to five seconds until the display screen changes back to its idle Off status message.