Mi A0101 Test Point New [2021] -

from the motherboard. This ensures the device is completely powered down and prevents short-circuiting active power rails. Open the Device Manager on your Windows PC.

Follow these steps carefully. Hardware modification carries risks, so proceed with patience. Step 1: Disassemble the Device

: Work on an anti-static surface or wear an ESD wrist strap to protect the delicate silicon traces. Required Tools and Software

Before opening your device, ensure you have the following ready to prevent damage: Windows PC (laptop or desktop). USB Cable: High-quality original Xiaomi USB cable. Tweezers: Metal tweezers (crucial for bridging the points). mi a0101 test point new

Hold the contact bridge for , then remove the tweezers carefully.

: Ensure you are using clean, uninsulated metal. Painted or plastic-coated tips will fail to complete the electrical circuit.

: While holding the short, plug the USB cable into your computer. from the motherboard

: Use the Mi Flash Tool to select your official Fastboot ROM and click "Flash" . Critical Safety Warnings

: Be cautious of "Anti-Rollback" protections; ensure you are flashing a compatible or newer firmware version to avoid a hard brick.

This procedure requires opening the phone, which will void any remaining warranty and risks permanent physical damage if done incorrectly. Follow these steps carefully

: If the screen stays black, you are likely in EDL mode. If the Mi logo appears, the test points were not bridged correctly.

# 1️⃣ Download the official fastboot flashable image package (e.g., from Xiaomi’s site) # 2️⃣ Unzip to a folder: C:\MiFlash\A0101\