Powered by Discuz! X3.4
漏 2001-2018 Comsenz Inc.
| Problem | Likely Cause | Solution | |---------|--------------|----------| | Tool not recognized by PC | FTDI drivers missing | Install FTDI CDM 2.12.28 drivers manually. | | "Version mismatch" error | Wrong image for your clone (EU vs CN version) | Download a "universal 5.017" image with both bootloaders. | | SD card not booting | Partition table corruption | Use Diskpart clean then re-flash the image. | | Kess powers off when reading ECU | Weak power supply | Use a powered USB hub with 2A output. | | Anti-virus deletes loader file | False positive on kloader.exe | Add exception for your Kess V2 folder. |
Gently push the old SD card inward to click-release and remove it. Kess V2 5.017 Sd Card Image Download
This method uses the K-Suite software's built-in update functionality and works with any SD card. | Problem | Likely Cause | Solution |
Download SD Card Formatter (by the SD Association) to cleanly clear the card before writing. | | Kess powers off when reading ECU
Factory clones typically ship with generic, low-grade SD cards prone to data corruption.
The Kess V2 5.017 protocol is a staple in the world of ECU tuning, offering a reliable gateway for reading and writing engine maps via OBDII. However, because many of these units are clones, the internal SD card is often the first component to fail. If your device is stuck on a "Wake up error" or "External flash not found" message, you likely need a fresh SD card image.
Once completed, safely remove the card and insert it back into the Kess V2 unit. Tips for Maintaining Your Kess V2 5.017
| Problem | Likely Cause | Solution | |---------|--------------|----------| | Tool not recognized by PC | FTDI drivers missing | Install FTDI CDM 2.12.28 drivers manually. | | "Version mismatch" error | Wrong image for your clone (EU vs CN version) | Download a "universal 5.017" image with both bootloaders. | | SD card not booting | Partition table corruption | Use Diskpart clean then re-flash the image. | | Kess powers off when reading ECU | Weak power supply | Use a powered USB hub with 2A output. | | Anti-virus deletes loader file | False positive on kloader.exe | Add exception for your Kess V2 folder. |
Gently push the old SD card inward to click-release and remove it.
This method uses the K-Suite software's built-in update functionality and works with any SD card.
Download SD Card Formatter (by the SD Association) to cleanly clear the card before writing.
Factory clones typically ship with generic, low-grade SD cards prone to data corruption.
The Kess V2 5.017 protocol is a staple in the world of ECU tuning, offering a reliable gateway for reading and writing engine maps via OBDII. However, because many of these units are clones, the internal SD card is often the first component to fail. If your device is stuck on a "Wake up error" or "External flash not found" message, you likely need a fresh SD card image.
Once completed, safely remove the card and insert it back into the Kess V2 unit. Tips for Maintaining Your Kess V2 5.017
Powered by Discuz! X3.4
漏 2001-2018 Comsenz Inc.