Dtape Dt50 User Manual Pdf 2021 🆕

Move the device back and forth. The screen will display the real-time distance, alongside the and Minimum (Min) distances recorded during the sweep. Press MEAS once to stop the tracking mode. 5. Calibration and Error Codes Manual Accuracy Calibration

Use a target plate, or shade the target area from direct sunlight. Received signal is too strong.

A: Yes. The three-prong plug must be connected to a grounded outlet. Never use a cheater plug or ungrounded extension cord.

Keep the device perfectly level, aim straight at the target base, and press . dtape dt50 user manual pdf

Instead of manually multiplying numbers, let the internal chip do it for you: Area ( M2cap M squared Ft2cap F t squared

This report synthesizes the essential information from the user manual, covering its technical specifications, operational modes, and maintenance guidelines. Product Overview

: You aim the red laser at your target. If you’re measuring a long hallway (up to ), the device handles the math instantly with ±1/16 inch accuracy Advanced Modes Move the device back and forth

: Use this for indirect measurements (e.g., measuring a wall height from a distance). Measure the hypotenuse and base as prompted to find the vertical height. 3. Advanced Functions

This manual is for informational purposes. Always refer to the original PDF provided by Dtape for official safety warnings and regulatory compliance.

The user manual for the D-Tape DT50 is a valuable resource that provides detailed instructions on how to use and maintain the device. Here's an overview of the manual's contents: A: Yes

The device automatically calculates the total volume in cubic units. Indirect Measurement (Pythagoras Mode)

Icons for a square (Area), cube (Volume), or triangle (Pythagorean). 3. Step-by-Step Operating Instructions Powering On/Off and Changing Units

Powers on the device if it is off. When the device is on, a short press activates the laser pointer, and a second press takes the measurement.

Press the button three times until a right-triangle icon appears. Aim at the highest point (hypotenuse) and press Read .