Use or DOWN to set the alarm hour, then press ALARM to confirm.

: To preserve battery life, the screen automatically goes to sleep and turns off after roughly 16 seconds. To wake the display up, press any button, clap your hands, or gently tap the surface the clock rests on. 7. Troubleshooting Frequently Asked Questions

The DT6507 LED mirror clock is a stylish and functional time-telling device that's easy to install and operate. By following the instructions outlined in this article, you can get the most out of your clock and enjoy its features for years to come. If you have any further questions or issues, refer to the user manual or contact the manufacturer's customer support team.

If you have trouble with specific features like the or display modes , AI responses may include mistakes. Learn more INSTRUCTION MANUAL

The DT6507 has a straightforward, LED-based interface. Press the MODE button to cycle through its three main display screens:

From the main screen, press the MODE button once. The display will show the date (default is often 2018 or 2020).

Insert the included USB cable into a USB adapter (5V, not included) and plug it into the back of the clock. This ensures the LED display stays on constantly.

Press and hold the button for 3 seconds until the display begins to flash.

Press to switch to the end hour; use UP or DOWN to set the morning brightening time (default is 06:00). Press MODE to save. 🔄 Step 5: Advanced Display Cycles and Temperature

| Issue | Solution | | :--- | :--- | | | If using batteries, the screen auto-offs to save power. Press the top button to wake it. If plugged in, check the USB connection. | | Time resets to 12:00 | The button cell battery (backup battery) may be dead. Replace the button cell (usually CR2032) or ensure main power is connected. | | Alarm not sounding | Ensure the Alarm Icon (Bell) is visible on the screen. If the icon is not there, the alarm is turned off. | | Screen too dim | This device requires a power adapter for full brightness. In battery-only mode, the brightness is limited to conserve power. |

The alarm will ring again after a default interval (often 5 minutes).