is an industry-standard marine oil content meter designed by Deckma Hamburg GmbH . It works alongside to continuously measure oil-in-water concentration. The device meets International Maritime Organization (IMO) standards under Resolution MEPC.60(33) .
This guide provides an overview of the key sections of the OMD-11 instruction manual, covering installation, operation, and maintenance based on Deckma Hamburg technical documentation. 1. Introduction to Deckma OMD-11
Check the internal fuse and ensure the power supply matches the unit's rating. 6. Importance of the Manual for Port State Control
Ultimate Guide to the Deckma OMD-11 Bilge Alarm: Operation, Maintenance, and Troubleshooting deckma omd11 manual
A digital or moving-coil meter showing the current oil concentration.
uses the to detect oil particles. A light source passes through the sample water; if oil is present, the light scatters. Highly sensitive sensors measure this scattered light and convert it into a digital ppm reading on the front panel. 3. Installation Guidelines
IMO regulations require periodic calibration checks. You can contact certified providers like Mackay Marine for on-site service or exchange units. Installation: is an industry-standard marine oil content meter designed
Gently scrub the glass tube vertically. Avoid abrasive pads or harsh chemicals that can scratch the optical glass. Flush the cell thoroughly with fresh clean water.
:
The Deckma OMD-11 is a high-precision 15 ppm bilge alarm monitor designed to improve the reliability and operation of oily water separator (OWS) systems. Meeting the requirements of IMO Resolution MEPC.60(33) , the OMD-11 utilizes advanced solids suppression technology to distinguish between oil particles, solid particles, and water turbidity. This guide provides an overview of the key
Proper physical positioning and electrical wiring prevent false alarms and component degradation. Mechanical Mounting
The Deckma OMD11 manual is essential for ensuring the proper installation, operation, and maintenance of the system. By following the guidelines and instructions provided in the manual, shipowners and operators can:
To ensure accurate readings and prevent "false alarms," follow these manual-recommended installation steps: