Turn the printer off using its physical power button, wait 10 seconds, and turn it back on normally. Important Warnings and Safety Precautions
Before using the Canon Service Tool 5610, please note:
Turn off the printer but leave it connected to the power outlet and the PC via USB. Canon Service Tool 5610 Download
The Service Tool v5610 is a specialized Windows application that interfaces directly with the printer's mainboard EEPROM. It clears these system locks, flashes firmware configurations, and resets the counter to 0%. Key Features
: Allows reading and writing of the printer's EEPROM data for troubleshooting. Turn the printer off using its physical power
: Canon does not provide this tool to the general public. It is intended for authorized service centers.
If you try to enter Service Mode using the wrong button combination too many times, or use an incompatible older version of the Service Tool (like v3400), the mainboard’s EEPROM chip will lock permanently. Once locked, the printer can never enter Service Mode again, and the motherboard must be physically replaced. It is intended for authorized service centers
Click at the top of the interface to print out a log sheet verifying the counter reads D=000.0 (0% full).
The Canon Service Tool (various numbers, e.g., 5000, 5400, 5610) is an used by Canon-authorized service centers. It is not intended for public distribution .
Triggers advanced ink flushing mechanisms to clear stubborn nozzle clogs.
I can provide specific instructions or compatibility advice tailored to your exact printer setup. AI responses may include mistakes. Learn more Share public link