Calibration requires certified test weights (usually 6kg, 15kg, or 30kg depending on model). Entering calibration mode incorrectly can lock the scale.
The calibration protocol utilizes the diagnostic menu embedded within the unit's firmware, triggered by a physical switch. Follow these precise steps to calibrate your indicator: 1. Enter the Diagnostic Menu
Press the button to exit the menu and restart the scale. The scale will restart and return to normal operation mode. Troubleshooting & Maintenance avery berkel l126 calibration
Some configurations may request a mid-range weight (e.g., 3kg). If the display prompts a different number, place that specific weight and confirm.
Locate the calibration security switch (usually found behind a lead seal or a small panel on the underside/back of the indicator). Move the switch to the or CAL position. Follow these precise steps to calibrate your indicator: 1
The display should show DIAG (Diagnostics). Press the ZERO (Red) button twice. The display should now read CAL (Calibration).
If the scale still weighs incorrectly after calibration, the load cell might be damaged or faulty. Maintaining Your Scale triggered by a physical switch.
The Scale on Platform B
Note: While menu interfaces fluctuate slightly based on regional firmware variations, Avery Berkel's L-series architecture relies on an analog-to-digital setup and span methodology.