Once installed, you need to configure the R2D2-72 and prepare it for use. Preparing the Salt Tank
Remove the red split pin and secure the hose to the main unit, then fix it with the clamp. Step 3: Install the Waste Water Hose
Fill the brine tank with high-purity regenerative salt tablets (according to DIN 19604, DIN EN 973 Type A). aqmos r2d272 installation new
Connect the BFT-connectors to the armored hoses, using flat seals, and connect these to your main water pipe. Step 2: Connect the System
When installing a new unit, ensure that all connections are kept clean to avoid contamination. 5. Maintenance Guidelines To keep your Aqmos R2D2-72 running efficiently, ensure you: Regularly check the salt level and refill as needed. Check the pre-filter periodically for clogging. Do not leave the unit in a room with freezing temperatures. Once installed, you need to configure the R2D2-72
AQR2D272-2026-001 Date: 2026-04-19 Technician: [Name / ID] Customer / Site: [Customer Name / Location] Device Model: AQMOS R2D272 Serial Number: [S/N from unit] Firmware Version: [e.g., v2.7.2]
Users generally find the installation straightforward, especially for those with basic DIY or plumbing skills. Amazon.com.be Included Components Connect the BFT-connectors to the armored hoses, using
| Parameter | Specification | |-----------|----------------| | Temperature | 0°C to +50°C (operating) | | Humidity | 10%–90% RH, non-condensing | | Altitude | ≤2000 m | | Pollution degree | 2 (IEC 60664-1) | | Mounting orientation | Vertical, ±15° max tilt |