What (Anilam, Acu-Rite, etc.) are connected to the unit?

Use the axis select buttons (X, Y, or Z) to toggle between resolution profiles.

The Mini Wizard utilizes a traditional linear power supply containing a heavy step-down transformer and voltage regulators.

Press the or Zero key to clear the display value to 0.0000 . Preset Entries To enter a specific coordinate dimension manually: Select the target axis key ( X or Y ). Use the numerical keypad to type your desired dimension.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

If the problem stays on the same display axis, the console logic card or internal connector is faulty.

This article consolidates all three.

Because original physical manuals are rare, finding accurate configuration sequences for parameters like scale resolution or axis counting direction can be highly challenging. This technical guide serves as a comprehensive manual to restore, program, and operate an Anilam Mini Wizard A163 console. 🛠️ Console Hardware Overview & Specifications

The 3rd digit from the right controls this. Setting it to "1" provides radius (normal) readings, while a "0" doubles the count for diameter readings, common in lathe operations.

The A163 manual includes scale pinouts (quadrature TTL at 5V). You can wire existing Anilam glass scales to a cheap Arduino Touch DRO (open source) using a differential line receiver board (AM26LS32).